LAST SOLD AT ₹ 93,456.00
SKU # 1000003260
Ador Welding Machine CHAMP MIG 250
PAN INDIA DELIVERY
100% Genuine Products
100% Secured Payments
Product Description
General Features :
CHAMP MIG 250 is IGBT inverter based welding outfit suitable for GMAW applications. The IGBT Power module, ferrite core and fast recovery diode are used as key device for power conversion and trans-mission to assure better efficiency and performance. The complete system consists of power source, wire feeder and MIG torch and interconnecting cables.
Details Of Complete System :
|
Sr. No. |
Description |
Champ Mig 250 A |
Champ Mig 250 B |
|
1 |
Power Source |
ICVR 250 |
ICVR 250 |
|
2 |
Wire feeder |
FEEDLITE 20 (NELR) |
FEEDLITE 20 (NELR) |
|
3 |
Torch |
ADOR TW 252 (E) |
ADOR MTG 250 (E) |
Salient Features :
-
Inverter based GMAW outfit
-
High efficiency and high power factor – resulting energy saving
-
Auto “Weld Stop” when welding torch is taken away from weld job
-
Compatible to Power Generator Supply
-
Enhanced Reliability due to SMD technology
-
Digital Panel for adjusting the welding parameters
-
30% more Energy efficient than conventional machines
-
Maximum Power factor is 0.93
-
Excellent dynamic response enables superior arc characteristics. 2T, 4T operating modes
-
Electronic choke adjustment for better arc control
-
Crater voltage and Crater current adjustment through digital panel
-
Unique feature of Globule Detachment to stop formation of globules at the tip of wire at the end of welding
-
Automatic “Weld Stop” facility
Protection :
The equipment is provided with following protections.
-
Under Voltage and Over Voltage: Error message is displayed and the equipment shuts down if the supply voltage exceeds the positive or negative limits specified in the Technical Specifications
-
Over Temperature: Error message is displayed and the equipment shuts down if the temperature of the main power components exceeds the safe limits
-
Single Phasing Protection: Error message is displayed and the equipment shuts down if any one of the three phase supply line is absent (single-phasing prevention / protection)
Warranty :
One year from the date of commissioning. ADOR WELDING LIMITED warrants that all new equipment sold from Plant/Area Offices / Authorised Distributors are free from defects in materials and workmanship and will perform in full accordance with applicable specifications.
-
In view of continuous development, ADOR WELDING LIMITED reserves the right to modify/change the design and /or the specifications without any prior notice.
-
Backed by dedicated customer care package.
Product Specifications
Input Specifications
|
Input |
Unit |
ICVR 250 |
|
Input Supply |
||
|
Voltage |
Volt |
415, +15%, -10% |
|
Phase |
No |
3 |
|
Frequency |
Hz |
50/ 60 |
|
Input KVA |
||
|
at 100% duty cycle |
KVA |
6.5 |
|
at No Load |
KVA |
0.19 |
Output Specification
|
Parameters |
Unit |
Value |
|
Open Circuit Voltage |
Volts +/-5% |
65 |
|
Welding Current Range |
Amp |
50-250 |
|
Welding Current (40°C 10 minutes cycle) |
||
|
at 100% duty cycle |
Amp |
195 |
|
Welding Voltage Range |
Volt |
16-34 |
|
Crater Current Range |
Amp |
50-250 |
|
Crater Voltage Range |
Volt |
16-34 |
|
Mode of operation |
- |
2 track, 4 track, Gas check, OCV check facility |
|
Remote Control (on wire feeder) |
- |
For setting voltage & current |
|
Power Factor |
- |
Max 0.93 |
|
Efficiency |
% |
83% at 100% duty cycle |
General Specification
|
Parameters |
Unit |
Value |
|
Compatibility to International standard |
|
As per Std. EN60974-1 |
|
Wire feed speed |
m/min |
1.5-18 |
|
Suitable Welding Wire Diameter |
mm |
Steel 0.8,1.0 and 1.2 |
|
Ingress Protection |
Class |
IP23 |
|
Cooling |
Type |
Forced Air |
|
Dimensions (Approx.) |
||
|
Length |
mm |
500 |
|
Width |
mm |
260 |
|
Height |
mm |
470 |
|
Weight |
Kg |
26 |
|
Audio Noise Emission |
|
70 |
|
Manufacturer Details |
|
Ador Welding Limted Corporate Marketing Office: Survey No. 147/2B+3, Akurdi, Near Khandoba Mandir, Chinchwad, Pune - 411 019, Maharashtra, India. Toll-Free: 18002331071 care@adorians.com |
Other Details
Dimension (CM) - L x B x H |
|
Unit of Measurement |
|
Weight |
kg |
Generic Type |
MIG Welding Machine |
Manufacturer Details |
Ador Welding Ltd Survey No. 147, P.B. No. 2 Akurdi Chowk, Chinchwad , Pune, Maharashtra-411019, India Phone: +91-9540071236 |
Packer Details |
Ador Welding Ltd Survey No. 147, P.B. No. 2 Akurdi Chowk, Chinchwad , Pune, Maharashtra-411019, India Phone: +91-9540071236 |
Country of Origin |
India |
Write a review
Your review has been posted...!
