SKU # 1000088225
APC Power-Saving Back-UPS Pro 1000 With LCD 230V BR1000G-IN
PAN INDIA DELIVERY
100% Genuine Products
100% Secured Payments
Product Description
-
Adjustable voltage sensitivity
-
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications
-
Adjustable voltage-transfer points
-
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation
-
Audible alarms
-
Provides notification of changing utility power and UPS power conditions
-
Automatic self-test
-
Periodic battery self-test ensures early detection of a battery that needs to be replaced
-
Battery failure notification
-
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Battery replacement without tools
-
Enables fast battery replacement, lowering Mean Time to Repair (MTTR)
-
Battery-protected and surge-only outlets
-
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
-
Boost and Trim Automatic Voltage Regulation (AVR)
-
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models)
-
Building Wiring Fault Indicator
-
This LED informs users of potentially dangerous wiring problems in the wall circuit
-
Cold-start capable
-
Provides temporary battery power when the utility power is out
-
Disconnected battery notification
-
Warns when a battery is not available to provide backup power
-
Green mode
-
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection
-
Hot-swappable batteries
-
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
-
Intelligent battery management
-
Maximizes battery performance, life, and reliability through intelligent, precision charging
-
LCD graphics display
-
Text and mimic diagrams that display modes of operation, system parameters and alarms
-
Power-saving outlets
-
Automatically cuts power to idle equipment to conserve electricity
-
Resettable circuit breaker
-
Easy recovery from overloads; no need to replace a fuse
-
Serial connectivity
-
Provides management of the UPS via a serial port
-
USB connectivity
-
Provides management of the UPS via a USB port (not available on all models)
-
User-replaceable batteries
-
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
-
Back-UPS Pro Features & Benefits
-
Availability
-
Automatic self-test
-
Periodic battery self-test ensures early detection of a battery that needs to be replaced
-
Battery failure notification
-
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
-
Boost and Trim Automatic Voltage Regulation (AVR)
-
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models)
-
Cold-start capable
-
Provides temporary battery power when the utility power is out
-
Customizable voltage sensitivity
-
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics
-
Customizable voltage-transfer points
-
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics
-
Green mode
-
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection
-
Intelligent battery management
-
Maximizes battery performance, life, and reliability through intelligent, precision charging
-
Transformer-block spaced outlets
-
Protect equipment with input transformer blocks without blocking access to other receptacles
-
Protection
-
Battery and surge protected outlets
-
Back up and protect your hardware and data during power outages, surges and spikes
-
Dataline surge protection
-
Provides protection of connected equipment from power surges on the data lines
-
Surge only outlets
-
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage
-
Battery-protected and surge-only outlets
-
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
-
Boost Automatic Voltage Regulation (AVR)
-
Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery
-
Serviceability
-
Resettable circuit breaker
-
Easy recovery from overloads; no need to replace a fuse
-
Simple battery replacement
-
Increases UPS availability by allowing quick, easy battery replacement
-
Manageability
-
Disconnected battery notification
-
Warns when a battery is not available to provide backup power
-
LCD Status Display
-
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs
-
Audible alarms
-
Provides notification of changing utility power and UPS power conditions
-
USB connection
-
Use your PC to access additional power protection and management features for your UPS via a USB Port
-
Safety
-
Safety-agency approved
-
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment
Product Specification
Brand |
APC |
Product Type |
Back-UPS |
Model |
BR1000G-IN |
Output |
|
Output Power Capacity |
600 Watts / 1.0kVA |
Max Configurable Power (Watts) |
600 Watts / 1.0kVA |
Nominal Output Voltage |
230V |
Efficiency At Full Load |
84.0 % |
Output Frequency (Sync To Mains) |
50/60 Hz +/- 1 Hz Sync to mains |
Topology |
Line interactive |
Waveform Type |
Stepped approximation to a sinewave |
Output Connections |
(2) India 3-pin 6A (4) India 3-pin 6A |
Transfer Time |
8 ms typical : 12 ms maximum |
Input |
|
Nominal Input Voltage |
230V |
Input Frequency |
50/60 Hz +/- 3 Hz Auto-sensing |
Input Connections |
India 3-pin 6A |
Cord Length |
1.5meters |
Input Voltage Range For Main Operations |
170 - 294V |
Number Of Power Cords |
1 |
Efficiency At Full Load |
84.0 % |
Batteries & Runtime |
|
Battery Type |
Lead-acid battery |
Batteries & Runtime |
|
Typical Recharge Time |
7.4hour(s) |
Expected Battery Life (Years) |
2 - 4 |
Rbc Quantity |
1 |
Battery Charge Power (Watts) |
29 Watts |
Extendable Run Time |
1 |
Communications & Management |
|
Interface Port(S) |
USB |
Control Panel |
Multifunction LCD status and control console |
Audible Alarm |
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
Surge Protection And Filtering |
|
Surge Energy Rating |
680Joules |
Color |
Black |
Environmental |
|
Operating Temperature |
0 - 40 °C |
Operating Relative Humidity |
0 - 95 % |
Operating Elevation |
0 - 3048meters |
Storage Temperature |
-15 - 45 °C |
Storage Relative Humidity |
0 - 95 % |
Storage Elevation |
0 - 15240meters |
Audible Noise At 1 Meter From Surface Of Unit |
45.0dBA |
Conformance |
|
Approvals |
BIS |
Physical |
|
Maximum Height |
301MM, 30.1CM |
Maximum Width |
114MM, 11.4CM |
Maximum Depth |
382MM, 38.2CM |
Net Weight |
11.35KG |
Warranty |
2 years repair or replace |
Other Details
Dimension (CM) - L x B x H |
|
Unit of Measurement |
|
Weight |
kg |
Generic Type |
UPS |
Manufacturer Details |
APC Schneider Electric India Private, Ltd. Bearys Global Research Triangle Sy. No. 63/3B, Gorvigere Village, Bidarahalli Hobli, Bangalore East Taluk, Whitefield Hoskote Road Bangalore- 560115 |
Packer Details |
APC Schneider Electric India Private, Ltd. Bearys Global Research Triangle Sy. No. 63/3B, Gorvigere Village, Bidarahalli Hobli, Bangalore East Taluk, Whitefield Hoskote Road Bangalore- 560115 |
Country of Origin |
India |
Write a review
Your review has been posted...!