Out of Stock!
SKU # 1000122255
Bosch Plena System Pre-Amplifier LBB1925/10
PAN INDIA DELIVERY
100% Genuine Products
100% Secured Payments
Product Description
-
Six-zone system pre-amplifier,with single or dual channel operation
-
Two input channels for call stations
-
Universal input for microphone/line,with speech optimized tone control
-
Three inputs for BGM selection and music optimized tone control
-
Front panel zone selection for BGM and call station zone selection for calls
-
The Plena system pre-amplifier is a versatile,high-performance unit with call and mono BGM (background music)
-
It fulfills a wide variety of public address requirements at a surprisingly low cost
-
It can provide dual channel operation for simultaneous calls and BGM for up to six different zones,using two Plena amplifiers
-
Functions
-
The call channel provides two inputs for the Plena call stations,LBB 1941/00 (all-call) or LBB 1946/00 (six-zone),with loop-through capability,and universal,balanced input
-
One is a 3-pin XLR connector for microphone or line level (selectable),and the other is a 5-pin DIN-connector with all-call priority contact,which may also be used to start one of the available chime attention signals
-
The microphone input has a selectable speech filter for improved intelligibility,a volume control,and bass and treble tone controls with shelving characteristics optimized for speech
-
The call channel is available on the balanced XLR master output
-
The BGM channel provides three inputs on stereo cinch-connectors, converted to mono,with front panel selection,volume control and bass and treble tone controls with shelving characteristics optimized for music
-
The BGM channel has a direct output on balanced XLR for dual channel operation
-
It can also feed the master output,with the lowest priority,for single channel operation
-
Zone selector switches on the front panel control the BGM routing
-
An overload protected 24 VDC output provides power for driving external relays,often making an external power supply unnecessary
-
An emergency/telephone input with signal level detector (VOX) and volume preset has the highest priority to all zones
-
Two trigger inputs (contact closure) activate alarm or time signals to pre-selected zones
-
Many different chime tones are available
-
A PC audio input with RS-232 control provides software controlled zone configuration,or automatic messaging in combination with the LBB 1965/00 Plena Message Manager
-
There are six levels of priority available for BGM,microphone,call stations, trigger inputs and emergency input
-
A set of relays directs the amplifier output(s) to different loudspeaker groups (zone switching)
-
Each zone has a tri-state control on the front panel that can turn it off, switch it to the call channel,or to the BGM channel
-
The all-call microphone input and emergency activation override the call station selection on the call channel
-
Each zone has separate priority overrides with preset volume levels
-
This assures an appropriate message volume,independent of any local volume settings,such as for BGM
-
Both three-wire and four-wire override schemes are supported
-
An override also activates a voltage-free contact (call-active) available for external control and monitoring
-
The master output channel,or one of the input channels,can be monitored through the headphone connector and/or the LED VU-meter
-
Controls And Indicators
-
Front
-
LED power meter
-
Power on LED
-
Call active LED
-
Three knobs for mic/line volume, treble, and bass levels
-
Three knobs for BGM volume, treble, and bass levels
-
BGM source selection knob
-
Six zone-selections keys
-
Six zone status LEDs
-
On/off switch
-
Back
-
EMG input volume control
-
Mains voltage switch
Interconnections -
Front
-
Headphone jack
-
Back
-
One (DIN or XLR) Mic/line input
-
Two (DIN/DIN) call station inputs
-
PC audio (cinch) input
-
Priority input
-
Master (XLR) output
-
BGM (XLR) output
-
Emergency signal input
-
Two trigger inputs
-
RS-232 (DE-9)
-
Three (cinch) CD, tape, aux inputs
-
Six 100 V speaker outputs
-
24 VDC output
-
24 VDC input
-
Three control inputs
-
Ground screw
-
IEC mains socket
Product Specification
| Brand | Bosch |
| Product Type | Amplifier |
| Product Model | LBB1925/10 |
| Mains Power Supply | |
| Voltage | 230/115VAC, ±15%, 50/60 Hz |
| Current Inrush | 230/115 VAC, 1.5/3 A |
| Maximum Power Consumption | 25 VA |
| Battery Power Supply | |
| Voltage | 24 VDC, +10% / -15% |
| Current Maximum | 1 A |
| Performance | |
| Frequency Response | 50 Hz to 20 kHz (+1 / -3 dB) |
| Distortion | <0.5% |
| Bass Control | ±10 dB @ 100 Hz |
| Treble control | ±10 dB @ 10 kHz |
| Channel Separation | >70 dB @ 1 kHz |
| Priority Mute | >40 dB |
| Dynamic Range | 100 dB |
| Mic/Line Input | 1 x |
| Connectors | 5-pin DIN,3-pin XLR,balanced,with phantom power |
| Sensitivity | 1 mV (mic), 200 mV (line) |
| Impedance | >1 kohm (mic); >5 kohm (line) |
| S/N (Flat At Maximum Volume) | >63 dB (mic); >70 dB (line) |
| S/N (Flat At Minimum Volme/Muted) | >75 dB |
| CMRR | >40 dB (50 Hz – 20 kHz) |
| Headroom | >25 dB |
| Speech Filter | -3 dB @ 315 Hz, high-pass,6 dB/oct |
| Phantom Power Supply | 16 V via 1.2 kohm, (mic mode only) |
| Line Input | 3 x |
| Connector | Cinch, stereo converted to mono,unbalanced |
| Sensitivity | 200 mV |
| Impedance | 22 kohm |
| S/N (Flat At Maximum volume) | >70 dB |
| S/N (Flat At Minimum Volume/Muted) | >75 dB |
| Headroom | >25 dB |
| Master Output | 1 x |
| Connector | 3-pin XLR, balanced |
| Nominal Level | 1 V |
| Impedance | <100 ohm |
| Tape Output | 1 x |
| Connector | Cinch, 2 x mono |
| Nominal level | 350 mV |
| Impedance | <1 kohm |
| Headphone Output | 1 x |
| Connector | 6.3 mm jack stereo, signal mono |
| Nominal Level | 3 V |
| Impedance | <100 ohm |
| Zone Relays | 5 A |
| Contacts Voltage | 250 V |
| Contacts Current | 8 A |
| Interconnection Input / Emergency | 1 x |
| Connector | 3-pin XLR, balanced |
| Sensitivity | 200 mV (interconnection),100 mV to 1 V adjustable (emergency) |
| Impedance | >10 kohm |
| VOX Threshold | 45 mV (emergency) |
| Interconnection Output | 1 x |
| Connector | 3-pin XLR, balanced |
| Nominal Level | 200 mV |
| Impedance | <100 ohm |
| Relay Contacts | 30 V, 1 A |
| DC Supply Output Voltage | 24 V, 250 mA max |
| Environmental | |
| Operating Temperature | -10 ºC to +55 ºC (14 ºF to +131 ºF) |
| Storage Temperature | -40 ºC to +70 ºC (-40 ºF to +158 ºF) |
| Relative Humidity | <95% |
| Mechanical | |
| Mounting | Standalone, 19" rack |
| Color | Charcoal |
| Dimensions (H x W x D) | 100 x 430 x 270 mm |
| Weight | Approx. 5 kg |
| Warranty | As Per Manufacturer Terms and Condition |
Other Details
| Dimension (MM) – H x W x D | 100 x 430 x 270 |
| Unit of Measurement | 1 Piece |
| Weight | 5 kg |
| Generic Type | Amplifiers |
| Manufacturer Details | Bosch Limited Post Box No: 3000,Hosur Road, Adugodi, Bangalore - 560030, India, Phone :18004258665 |
| Packer Details | Bosch Limited Post Box No: 3000,Hosur Road, Adugodi, Bangalore - 560030, India, Phone :18004258665 |
| Country of Origin | India |
Write a review
Your review has been posted...!
